Steel products
We supply practical steel products for building, fabrication and site work from Germiston into Gauteng and across South Africa. The range covers structural sections, bar stock, roof sheeting and reinforcing mesh, with cutting and fabrication to requirement where needed.
Steel supply for building and fabrication work
Our steel products section covers the core items most contractors, fabricators and property owners need for structural work, roofing and concrete reinforcement. Orders range from a few lengths for a repair job to larger take-offs for factories, warehouses, farm sheds, churches and mine related structures.
Supply is handled from Germiston with practical attention to transport, handling and the way steel will be used on site. If you already have a cutting list or structural drawing we can work from that. If not, tell us the application, span, support points and finish requirement and we can guide you to the right product category before you ask for a quote.
What you can order in this section
The range includes common structural and building steel used in commercial, agricultural and industrial projects. Material can be supplied as full lengths or cut to requirement where appropriate, which helps reduce waste and site cutting time.
- Beams for primary structure, lintels, portal frames and heavy support work.
- Tubing and sections including square tube, rectangular tube, angle iron and lip channel for frames, purlins, bracing and general fabrication.
- Flat bar, round bar and square bar for cleats, brackets, base details, gates, repairs and workshop jobs.
- Roof sheeting for new roofs, side cladding and replacement sheets on older buildings.
- Reinforcing mesh for slabs, aprons, hardstands and other concrete work.
Where a job needs light fabrication before delivery, such as drilled plates or simple welded components, include that in your enquiry so the material and workshop work can be planned together.
How to choose between beams, sections and bar stock
Choosing steel starts with the load, the span and how the member is supported. Beams are normally used where a member must carry significant roof or floor load over a clear span. Tubing and lighter sections suit secondary framing, bracing and fabricated items. Bar stock is generally selected for connection parts, stiffeners and smaller fabricated components.
- Beams: best where bending load is higher and deflection matters, such as overhead support members and long openings.
- Tubing and sections: useful for columns, trusses, frames, rails and general steelwork where clean straight members are needed.
- Flat, round and square bar: suitable for cleats, straps, pins, brackets and custom fabricated details.
If you are matching into an existing structure, dimensions must be checked carefully before cutting. A replacement member that is close enough on paper can still cause fitting delays on site, especially where old buildings have moved slightly over time.
Roof sheeting for local site conditions
Roof sheeting choice depends on span between purlins, roof pitch, expected runoff and the environment around the site. Inland industrial sites in Gauteng often focus on practical cover width and installation speed, while coastal work may need extra attention to humidity, fastener selection and maintenance planning.
For replacement sheets, the profile and effective cover must match the existing roof so laps and flashings line up properly. It also helps to check municipal requirements for stormwater handling and any fire related rules that apply to the building use. On working sites there may be shutdown windows, power cut interruptions or limited crane access, so material length and bundle handling should be considered early.
- Choose the profile to suit the roof pitch and support spacing.
- Confirm sheet lengths against transport limits and safe site handling.
- Allow for flashings, ridge covers, side laps and fasteners in the take-off.
Reinforcing mesh and concrete support steel
Reinforcing mesh is commonly ordered for floor slabs, yards, equipment bases and general concrete work linked to steel buildings. The main points to confirm are slab thickness, load from vehicles or stored goods, spacing of movement joints and how the mesh will be supported during the pour.
Mesh should arrive with enough room on site for unloading and stacking clear of mud and standing water. For busy industrial properties, staged delivery can make sense so the crew is not shifting bundles around more than once. If the slab ties into columns, holding down bolts or edge beams, get those details coordinated early because changes on pour day can slow the whole programme down.
Ordering, cutting and practical delivery planning
A good steel order starts with clear quantities, section sizes, required lengths and the site town. If there is cutting, drilling or simple fabrication, mark each item against the drawing reference so there is no confusion in the workshop or on site. For collection and delivery, think about vehicle access, offloading equipment and whether long lengths can be turned into the property safely.
Most delays come from missing dimensions, unclear material grades or changes after cutting has started. Send the fullest information you have through the contact page and ask for a quote. For larger projects in Gauteng or elsewhere in South Africa, it helps to note whether the steel is for a new build, an extension or a repair, because that affects packing, sequencing and the way material is labelled.
Explore the range
Beams
Universal beams and structural sections for frames, supports, alterations and general building steelwork.
Read more
Tubing and sections
Steel tubing, angle, lip channel and square sections cut for fabrication, support frames and general site steelwork.
Read more
Flat, round and square bar
Mild steel bar stock for gates, brackets, frames, repairs and general fabrication work.
Read more
Roof sheeting
Practical roof sheeting supply for industrial and agricultural roofs, with clear advice on span, slope and fixing needs.
Read more
Reinforcing mesh
Reinforcing mesh for slabs and concrete work, supplied to suit practical site requirements.
Read moreWhat our Steel Structures customers say
Verified Google reviews
Questions we get asked
Can you cut steel products to the lengths we need?
Yes. Many steel products can be cut to requirement, and some orders can include basic fabrication as well. Send your cutting list or drawing references through the contact page so the order can be checked properly.
How do I know whether I need beams or tubing for a project?
That depends on the span, loading and the role of the member in the structure. Beams are usually chosen for heavier primary support, while tubing and sections are often used for frames, bracing and lighter structural work.
Do you supply steel products outside Germiston?
Yes. Supply is based from Germiston and covers Gauteng as well as projects across South Africa. When enquiring, include the delivery town and whether offloading equipment is available on site.
Ask for a quote
Send your building type or steel requirement, approximate dimensions and project town through the form, and the team can respond with a quote for supply, fabrication or erection.
Open the contact form